Which heads? ADA or R&D Red Heads.
Boy if I only had a nickel for every time this question is asked... How about I give the pros and cons of both..ADAPros: Good looking..uses replaceable domes..its one piece for strength..Cons: Billet...
View ArticleHow do I ship my pump?
Quote:Does anyone have any suggestions on when I send my pump to steve? Like any packing suggestions? Or any shipping company suggestion? Thanks First make sure to remove your small O-rings and either...
View Article1999 Ultra Spark Plugs
Not all 99's require the NGK R6918C-9 spark plugs, only the early models do. I believe the cutoff is HIN 41804 and above you can use the BR9ES plugs. The R6918C-9 plugs where required because the...
View ArticleHow to Silicone the Rideplate
Use GE II Clear Silicone Household Glue found at Lowes, Home Depot, etc....
View ArticlePump removal
Well I would be glad to explain it to you. 1) If it has the stock ride plate then you must remove the 2 ea. allen head screws that go thru the ride plate into the pump. (From the bottom.)2) Remove the...
View ArticleWhich Direction to Right a Capsized Ultra
You roll it Counterclockwise When viewed from behind.
View ArticlePWC 101 - Reed Valves
I'm bored so I figured I would let you guys educate me further.What are they, how do they work and why is one type better than another.Thanks....
View ArticleHow to buy a used ski!
Here is a link to help when buying a used ski. CLICK HERESteve, Ultra 150.com Administrator/Owner E-mail Steve@skiworx
View ArticleTorque Help..
hey guys im sorry too post this when i know that i need a book, but money is kinda tight right now for the time.. i was wondering if anyone can tell me the torque on the exhaust manifold,heads,jet...
View ArticleTriple Pipe Jetting and pop-off pressure
This is the starting jetting we use: Highs 145 145 155Lows 135 across 2.3 Needle and seat with a 95 spring..100 to 130 return It seems no 2 skis like the same return pressure.1.5-2 lbs pressure @...
View ArticleDetailing Your Ultra - By RJCarp2
In my younger days (I'm only 22, so that was just a few years ago) I did a lot of professional car detailing and I've carried over many techniques to the ski this spring. Just a warning...this post...
View ArticleOil Line Routing
I decided to add a pic of the oil line routing. We get a call about once a week asking for it, so here it is.. Please note these lines do have to go on as described below..
View ArticleWinter Trailer Maintance
For some of us its getting close to end of riding season, and trailer maintance is something that can be easily over looked, and leave you stranded next summer. Repacking the bearings now can usually...
View ArticleOil line size
Just to clarify for all the line to use is 1/8 id tygon. Kawi line is 3 mm and the tygon is 3.2mm the od works just fine for the factory clamps. You can get this from napa and carquest auto parts...
View ArticlePosting Pictures
The best way to post pictures here in the forum is using Photobucket. First you have to create a Photobucket account (click on link above) Then at the top of this page you should see: "Welcome (Your...
View ArticleChanging Avatar Picture
The Avatar is the picture displayed next to your name when you post on the board. You can change it to any custom image you would like. First open the Account Control Panel (Click Account at the top...
View ArticleFuel Octane Information, what does it really mean?
The octane rating of gasoline tells you how much the fuel can be compressed before it spontaneously ignites. When gas ignites by compression rather than because of the spark from the spark plug, it...
View Article
